background image

CONTENTS

1

..

Preface

2

..

Instructions and safety regulations (personal protection)

3

..

Getting started with the generating set

4

..

Using the generator set

5

..

Generating set maintenance

6

..

Transporting and storing the generating set

7

..

Repairing minor faults

8

..

Technical specifications

9

..

Conditions of warranty

1 Preface

IMPORTANT

Material damage

Before  use,  read  this  manual  and  the  safety  instructions  provided  alongside  it  thoroughly. 
Keep these safe throughout the unit's service life and always adhere to the safety advice and 
the usage and maintenance instructions contained therein.

The information contained in this manual is taken from technical data available at the time of print (the photos shown in this manual 
are not legally binding). In line with our policy of continually improving the quality of our products, this information may be amended 
without warning. On request, we can supply our original manuals in French via our website.

In this manual, dangers are represented by the following two symbols:

  DANGER

[Appropriate pictogram(s)]

RISK TO THE HEALTH OF THOSE CONCERNED
DANGER OF DEATH (if appropriate)

Indicates an imminent danger which may result in death or serious injury. Failure to follow the 
instruction shown may pose serious risks to the health and life of those concerned.

IMPORTANT

Material damage
[At-risk equipment]

Indicates  an  at-risk  situation.  Failure  to  follow  the  instructions  provided  may  result  in  minor 
injuries to those concerned or material damage.

2 Instructions and safety regulations (personal protection)

The  instructions  and  safety  regulations  must  be  read  carefully  and  followed  to  avoid  endangering  personal  health  and  safety.  If 
there is any doubt over the meaning of the instructions, please contact your nearest agent.

2.1

Meaning of the pictograms on the generating set

DANGER

DANGER: risk of electric shock

GROUND

DANGER:risk of burns

Before starting, check the oil level.

1

2

3

DANGER:
1 - Refer to the documentation supplied with the unit.
2 - Emission of toxic exhaust gases. Do not use in a confined or poorly 

ventilated area.

3 - Stop the unit before filling with fuel.

2.2

General guidelines

Never let other people use the unit without ensuring they have all of the necessary instructions beforehand. Never allow a child to 
touch the unit, even when switched off, and do not operate the unit when animals are in the vicinity (fear, disturbance, etc.).
In all cases, respect the local regulations currently in place concerning the use of the units. Exhaust gases, fuel and oil are toxic 
products; take all necessary protective measures.

2.3

Guidelines for protecting the environment

Drain the engine oil into a designated container: never drain or discard engine oil onto the ground.
As far as possible, avoid sound reverberating through walls or buildings (the noise will be amplified).
If the unit is used in wooded, bushy or uncultivated areas and if the exhaust silencer is not fitted with a spark arrester, clear any 
vegetation away from the area and take care that the sparks do not cause a fire. Once the unit is no longer being used (end of 
product life), take it to a waste collection point.

13/22

Содержание SDMO PERFORM 3000 XL TB UK C5















Отзывы: