- 57 -
Workshop Manual KD 441_cod. 1.5302.865_2
nd
ed_ rev.
01.
6
135
A
134
A
B
C
D
B
A
136
137
A
Reassembly
Set clearance at 0.10÷0.15 mm using a thickness gauge.
Tighten lock nut
A
at a torque of 7 Nm.
Valve/rocker arm clearance
Caution – Warning
Adjust the valve/rocker arm clearance when the engine is cold.
Turn the engine clockwise and place the piston at the TDC.
Loosen lock nut
A
while locking lock nut
B
in its position, as shown in
the figure.
Rocker arm cover
Replace the seal and assemble the rocker arm cover by tightening
the 3 screws
A
to a torque of 10 Nm.
Injector
Assemble injector
C
together with copper seal
D
.
Tighten injector bracket
B
fastening screw
A
to the cylinder head to a
torque of 9 Nm.
Important
Caution – Warning
The correct protrusion of the spray nozzle from the cylinder
head surface is obtained with copper seal D available in the
following thicknesses: 0.5, 1 and 1.5 mm.
Содержание RD 441
