background image

Maintenance

2

TP-7088    6/17

KohlerPower.com

SAFETY PRECAUTIONS

 

 DANGER:  

A hazard that will result in death, serious injury, or substantial property damage.

 

 WARNING: 

A hazard that could result in death, serious injury, or substantial property damage.

 

 CAUTION: 

A hazard that could result in minor personal injury or property damage.

NOTE:  is used to notify people of important installation, operation, or maintenance information.

 

WARNING

Explosive Fuel can 
cause fi res and severe 
burns.

Do not 

fi

 ll fuel tank while 

engine is hot or running.

Gasoline is extremely 

fl

 ammable 

and its vapors can explode 

if ignited. Never refuel while 

smoking or in vicinity of an open 

fl

 ame. Store gasoline only in 

approved containers, in well 

ventilated, unoccupied buildings, 

away from sparks or 

fl

 ames. 

Spilled fuel could ignite if it comes 

in contact with hot parts or sparks 

from ignition. Never use gasoline 

as a cleaning agent.

 

WARNING

Hot Parts can cause 
severe burns.

Do not touch generator 

while operating or just 

after stopping.

Never operate generator with heat 

shields or guards removed. Do not 

modify generator.
Place generator in a place where 

pedestrians or children are not 

likely to touch generator.
Be sure to carry generator only by 

its carrying handles.

 

WARNING

Rotating Parts can 
cause severe injury.

Always maintain a safe 

distance while generator 

is in operation.

Keep hands, feet, hair, and 

clothing away from all moving 

parts to prevent injury. Never 

operate generator with covers, 

shrouds, or guards removed.

 

WARNING

Hazardous Voltage.

Backfeed to utility system 

can cause property 

damage, severe injury, or 

death.

Never plug a portable generator 

directly into a building outlet.
If generator is used for standby 

power, have a certi

fi

 ed, licensed 

electrician install an automatic 

transfer switch to prevent 

inadvertent interconnection of 

standby and normal sources of 

supply.
There is a permanent conductor 

between the generator (stator 

winding) and the frame.

 

WARNING

Cleaning Solvents can 
cause severe injury or 
death.

Use only in well 

ventilated areas away 

from ignition sources.

Carburetor cleaners and solvents 

are extremely 

fl

 ammable. Follow 

cleaner manufacturer’s warnings 

and instructions on its proper and 

safe use. Never use gasoline as a 

cleaning agent.

 

WARNING

Electrical Shock can 
cause injury.

Do not touch wires while 

generator is running.

Never operate generator in rain or 

snow.
Never touch generator with wet 

hands or electrical shock may 

occur.

Содержание PRO6.4





















Отзывы: