1154809-T01-B
-3-
Outlet Downwards
1. Please install 16321T-YC05(AC) as below:
Please directly reference to Step 2 when installing 16321T-Y
(DC).
A.
CAUTION:
Please match 16306T-NA AC power unit when installing
16321T-YC05 (AC).
a. Outlet of AC power unit upward prohibited.
b. Do not connect 220V AC power supply to DC wiring
terminal.
c. Do not damage the covering of AC power unit or
remove screws to avoid leakage.
1
.
(
)
a.
b.
220V
DC
c.
(
)
2
(
)
16306T-NA
A.
16321T-YC05
16321T-Y
16321T-YC05
Outlet Upwards
Connect to
Sensor
Connect to
Sensor
Connect to AC
Power Supply
Connect to AC
Power Supply
INSTALLATION
C
CAUTION:
. When installing the power unit on the ceiling, please
chisel out a slot and layout bushing according to Fig., and
thread wire through the bushing.
One AC power unit can supply two
sensors at most.
C
.
Ceiling
Slot
Slot
AC Power Unit
Bushing(In-wall)
(
)
Bushing
(
)
(In-wall)
B
.
B
Notice:
. AC power unit connected to electric control box by
connection wire.
The length of the connection wire should keep
the connector out of the urinal. It s convenient
connect.
'
AC
16306T-NA
AC Power Unit
Connector
Connector
Wire Prepared
By Customer
Connect With
Control Box
Connect with the same color wire,
and protect connect area by insulation tape.
Notice:
To ensure an effective flush performance,
strongly recommended inner diameter of
water supply (including water meter, valve,
etc.) is no less than 25mm, and supplied
water pressure (sensor inlet dynamic
pressure) is 0.18MPa ~0.55MPa.
(
)
25mm
(
)
0.18MPa ~0.55MPa
