
-4-
4. DEFINE THE POSITION OF S-TRAP
4.
5. INSTALL THE NEW PAN
Place the pan and push up against the wall.
Check the mounting hole with pan on the floor.
Carefully remove the pan from the installation area.
Drill 3/8(10mm) mounting holes between the marked
locations on the floor and insert the anchor.
:
Overtightening
may cause breakage or chipping of the vitreous China.
Install the washer over the bracket and insert the hexagon
screw into the bracket through the washer then tighten the
screw.
Align the pan back to position over the brackets.
Install the sleeves and tighten the screw.
Attach the caps.
CAUTION Risk of product damage.
5.
10mm
Water Supply Hose
Screw
Hole
Sleeve
Hexagon
Lag Screw
Bracket
Washer
Anchor
Cover
1226681
S-Trap
305
102
185
245
Finished
Wall
1089093-T01-H