
-3-
INSTALLATION
1. Remove the Existing Toilet
·
·
·
Turn off the water supply.
Flush the toilet, then sponge out all remaining water from
the tank.
Disconnect the supply shut-off valve(if present), and
remove the old bowl and tank.
CAUTION: Risk of hazardous gases.
If the new toilet
is not installed immediately, temporarily stuff a rag in
the closet flange.
1.
·
·
·
(
)
(
)
2. PREPARE THE SITE
Position the template on the floor.
Trace around the template on the floor with a pencil.
Mark the mounting hole centerline on the floor.
2.
Finished
Wall
3. Connect the Supply Hose
·
Put inlet pipe(500mm recommended, not supplied)
throught the inlet pipe cover assembly and connect it with
the fill valve.
3.
·
(
500mm
)
Water Supply Hose
Rear
Bowl
BA
CK
BA
CK
1089093-T01-H