background image

BEFORE YOU BEGIN

ODEON

INSTALLATION INSTRUCTIONS

VITREOUS CHINA P/S-TRAP TOILET 

S-TRAP 305mm K-8766 LM 

P-TRAP 180mm K-8711 LM 

Ÿ

Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation  sequences. Follow 
the sections that pertain to your particular installation. This will help you avoid costly mistakes. In addition to Proper installation, 
read all operating and safety instructions.

Ÿ

All information in these instructions is based upon the latest product information available at the time of publication.

     Kohler India reserves the right to make changes in product characteristics, packaging, or availability at any time without notice.

Ÿ

These instructions contain important care, cleaning, and warranty information- 

please leave instructions for the consumer. 

ORDERING INFORMATION

Odeon S-Trap 305mm Toilet...............................K-8766LM                          Odeon P-Trap 180mmToilet..............................K-8711LM
     Includes seat.................................................K-8827LM                                 Includes Seat.............................................K-8827LM
     Includes bowl................................................K-8767LM                                 Includes bowl.............................................K-8709LM
     Includes tank.................................................K-8710LM                                 Includes tank..............................................K-8710LM

NOTES

Ÿ

Observe all local plumbing and building codes.

Ÿ

Shut off the water supply.

Ÿ

Ensure that the new drain and shut-off valve have the correct roughing-in dimensions. See Fig.#1.

Ÿ

Be very careful while working with vitreous china products. Vitreous china can break or chip if the bolts or nuts are overtightened, or 
if carelessly handled.

Ÿ

Carefully inspect the new fixture for any sign of damage.

Ÿ

Fixture dimensions are nominal and conform to tolerances established by ASME Standards (A112. 19.2-2003)

TOOLS AND MATERIALS REQUIRED
(Not supplied)

Ÿ

254mm adjustable wrench   

                              

Level 

                               

Screwdriver 

          

Ÿ

Metal file (file cut)   

                                             

Hacksaw  

                        

Straight pipe coupling        

   

Ÿ

Tape measure                      

                               

Putty knife                        Connection packaging 

  

        

Ÿ

Tubing cutter   

                                                   

Toilet supply shut-off valve. 15mm (½") recommended       

     

            

WARNING: Risk of external leakage.

 

The valve nut has been factory-tightened. Wrench tighten    

               1/4 turn past finger tight.

NOTICE: 

If no shut-off valve exists, install a shut-off valve below the tank before installing the new toilet.

Flexible hose are recommended to connect the supply line to the fill valve. If you use a rigid connection, take care not to apply side 
forces to the bottom of the fill valve.

1037406-LM01-B                                                                -1-

Содержание ODEON K-8766









Отзывы: