Kohler Mira Logic, Руководство пользователя

Страница: 5 / 16

5 1292000-W2-B
Minimum maintained pressure: 0.1 bar
Maximum maintained pressure: 5.0 bar
Warning!
Exceeding the stated maximum maintained pressure could result in excessive
spray forces and possible damage to the product.
These are the typical flow performance graphs for the Mira Logic adjustable shower fittings
only. There will be an additional pressure loss through the shower control.
Pressure loss = Pressure difference between the inlet and outlet of the fitting.
Flow Rates
Specifications
Installation must be carried out in accordance with these instructions, and must be conducted
by designated, qualified and competent personnel.
1. The hose retaining ring supplied must be used to stop the handset from dropping below
the spill-over level of the bath or shower tray. This will prevent water supply contamination
due to backsiphonage.
2. Installations must comply with UK Water Regulations/ Bye-laws (Scotland), and Building
and Plumbing Regulations in force at the time of installation.
3. When installing the shower fittings in a cubicle, position with the spray pointing across
rather than toward the opening of the cubicle.
4. When installing the shower fittings over a bath, position with the spray pointing down
the centre line of the bath.
5. Avoid layouts where the shower hose will be sharply kinked. This may reduce the life of
the hose.
6. Do not fit any form of flow control in the shower outlet.
7. Do not use excessive force when making connections.
Installation Requirements
0
5
10
15
20
25
30
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
FLOW (L/MIN.)
PRESSURE (KPA)
LOGIC HANDSET
Mode 1
Mode 2
Mode 3
Mode 4