background image

16

1292000-W2-B

Customer Service

Kohler Mira Limited, August 2018

Mira is a registered trade mark of 

Kohler Mira Limited.

The company reserves the right to alter 

product specifications without notice.

14648

Guarantee 

Your  product  has  the  benefit  of  our  manufacture's 

guarantee which starts from date of purchase. This 

guarantee  only  applies  in  the  United  Kingdom  and 

Republic of Ireland. To activate this guarantee, please 

return  your  completed  registration  card,  visit  our 

website or free phone 0800 5978551 within 30 days 

of purchase (UK only).
Within the guarantee period we will resolve defects in 

materials or workmanship, free of charge, by repairing 

or replacing parts or product as we may choose.

This guarantee is in addition to your statutory 

rights and is subject to the following conditions :

  ●  The guarantee applies solely to the original 

    installation under normal use and to the original 

    purchaser only. The product must be installed and 

    maintained in accordance with the instructions 

    given in this guide. 

  ●  Servicing must only be undertaken by us or our 

    appointed representative. 

  

Note!

 If a service visit is required the product must 

    be fully installed and connected to services.

  ●  Repair under this guarantee does not extend 

    the original expiry date. The guarantee on any 

    replacement parts or product ends at the original 

    expiry date.

  ●  For shower fittings or consumable items we 

    reserve the right to supply replacement parts only.

The guarantee does not cover:

  ●  Call out charges for non product faults (such as 

    damage or performance issues arising from 

    incorrect installation, improper use, inappropriate 

    cleaning, lack of maintenance, build up of 

    limescale, frost damage, chemical attack, 

    corrosion, system debris or blocked filters) or 

    where no fault has been found with the product.

  ●  Water or electrical supply, waste and isolation 

    issues.

  ●  Compensation for loss of use of the product or 

    consequential or indirect loss of any kind.

  ●  Damage or defects caused if the product is 

    repaired or modified by persons not authorised by 

    us or our appointed representative. 

  ●  Routine maintenance or replacement parts to 

    repaired or modified by persons not authorised by 

    comply with the requirements of the TMV2 or 

    repaired or modified by persons not authorised by 

    TMV3 healthcare schemes

  ●  Accidental or wilful damage. 

  ●  Products purchased ex-showroom display.

What to do if something goes wrong

If  your  product  does  not  work  correctly  refer  to  this 

manual for fault diagnosis and check that it is installed 

and commissioned in accordance with our instructions.

If this does not resolve the issue, contact us for help 

and advice.

Helpdesk Service

Contact  our  Customer  Services  Team  for 

product  advice,  to  purchase  spare  parts  or 

accessories or to set up service visit. You can contact 

us via phone or e-mail - contact details below.

Please  provide  your  model  name,  power  rating  (if 

applicable) and date of purchase.

Mira Showers Website 

(www.mirashowers.co.uk)

Visit our website to register your guarantee, 

download user guides, diagnose faults, purchase our 

full range of accessories and popular spares, or request 

a service visit.

Spares and Accessories

We  hold  the  largest  stocks  of  genuine  Mira 

spares  and  accessories.Contact  us  for  a 

price or visit our website to purchase items from our 

accessory range and popular spares. (Only available 

in the United Kingdom )

Service/Repairs

No  one  knows  our  products  better  than  our 

nationwide team of Service Technicians. We 

can carry out service or repair work to your product both 

during and after the guarantee period. (Only available in 

the United Kingdom and Republic of Ireland) Ask about 

our fixed price service repairs.

0800 001 4040

Fax: 01242 282595

Email – Visit 

www.mirashowers.co.uk/contactus

By Post: 

Mira Customer Services Dept, Cromwell 

Road, Cheltenham, Gloucestershire GL52 5EP

To Contact Us: Eire Only

01 531 9337

E-mail: 

[email protected]

To Contact Us: UK

Содержание Mira Logic

















Отзывы: