Kohler Mira Elite SE, Инструкция по установке и эксплуатации

Страница: 28 / 37

28 1383572-W2-A
Please note when altering the shower temperature...
CAUTION! Altering the temperature control rapidly can cause the water temperature
to become briefly hotter or colder than required. For best results, adjust the
temperature control a small amount and allow the temperature to stabilise. Continue
to adjust until a comfortable showering temperature is reached.
DO NOT increase the power setting while standing in the water flow. Avoid changing
the power setting when the shower is in use, this can cause a large increase or
decrease in water temperature.
DO NOT switch the shower off and back on while standing in the water flow. Cycling
the shower off/on may result in unstable water temperatures. Always ensure the
temperature has stabilised before re-using the shower.
The shower has a high performance pump installed, which has been acoustically
designed for quieter performance, but may produce some noise during operation.
Pump tone may change when altering temperature position.
For a cold shower select low .
For a summer warm shower select eco / high .
For a winter warm shower select high .
Adjust the power and temperature controls as required.
Flow rate will reduce when temperature control is increased.
COLD
HOT
Effect of Seasonal Changes
The temperature of the mains water feed to the cistern is not constant throughout the year, i.e.
cooler during winter, warmer during summer. To maintain the desired showering temperature,
adjust the power and temperature controls accordingly. The shower flow rate will adjust
automatically.