background image

3

InTRODUCTIOn

Thank you for purchasing a quality Mira product. 

To enjoy the full potential of your new product, 

please take time to read this guide thoroughly, 

having done so, keep it handy for future reference.

The Mira Cal bre eV is a thermostatic mixing 

shower with integral slidebar, hose and Mira 360 

shower handset.

The Mira Calibre eR is a thermostatic mixing 

shower  with  integral  riser  rail  and  fixed  height 

250mm showerhead attached with a ball joint.

The thermostatic mixing valve incorporates a 

temperature sensing unit, which provides an 

almost immediate response to changes in water 

temperature or pressure to maintain a comfortable 

shower. An adjustable maximum temperature stop 

is provided to limit the showering temperature to 

a preset level. This is a safety feature that can be 

adjusted after installation (see 

“Commissioning”

 

for further details) Inlet water filters are fitted to 

protect the internal mechanism.

Products manufactured by us are safe and 

risk-free, provided they are installed, used and 

maintained in good working order, in accordance 

with our instructions and recommendations. 

Guarantee

For 

domestic installations

, Mira Showers 

guarantee the Mira Calibre Thermostatic Mixer 

against any defect in materials or workmanship for 

a period of 

five

 years from the date of purchase.

The shower handset, hose and clamp bracket 

supplied with the Mira Cal bre eV model are 

guaranteed for 

one

 year from date of purchase.

The showerhead supplied with the Mira Cal bre eR 

model is guaranteed for 

one

 year from date of 

purchase.

For terms and conditions refer to 

‘Customer 

Services’

 on the back cover of this guide.

Recommended Usage

Application

Valve with Fittings

Domestic

ü

Light Commercial

ü

Heavy Commercial

û

Healthcare

û

Patents and Design Registration 

 

Patents:

GB 2 422 886

Patent Applications:

europe 07015846.4
USA 2010-0219255-A1

Design Registration:

001240527 - 0002

001240527 - 0004

001312649 - 0014

001004022

Содержание Mira Calibre ER





































Отзывы: