DUO SHOWER CURTAIN ROD & TOWEL RACK
PLEASE READ THROUGH ENTIRE INSTRUCTION BOOKLET BEFORE ATTEMPTING TO INSTALL THIS PRODUCT
BTH-110
Fits a standard 5 ft. bath tub, safely extend to 63 in. (5 ft. 3 in.) & can withstand a weight of up to 16 lbs.
Страница 1: ...AIN ROD TOWEL RACK PLEASE READ THROUGH ENTIRE INSTRUCTION BOOKLET BEFORE ATTEMPTING TO INSTALL THIS PRODUCT BTH 110 Fits a standard 5 ft bath tub safely extend to 63 in 5 ft 3 in can withstand a weight of up to 16 lbs ...
Страница 2: ...ted end cap and extend across to reach the opening of the partially mounted end cap 11 Adjust the partially mounted end cap until the second rod is straight and level Mark the hole location see image above 12 Repeat steps 4 through 6 Tighten the end cap in place Be sure to tighten both screws INSIDE SHOWER OUTSIDE SHOWER 1B IMPORTANT BE SURE THE END CAPS AND RODS ARE LEVEL BEFORE DRILLING THE MOUN...
Страница 3: ...EXTREMELY SHARP Handle with care 4 Push the rear end of the locking mechanism all the way into the larger tube and pull the small diameter rod through a short distance Replace the plastic ring and then the inner caps and you are ready to continue installation CAUTION The locking mechanism on the smaller diameter rod is EXTREMELY SHARP and can cause injury Avoid contact whenever possible and handle...
