Kohler K-T10669, Руководство по установке и эксплуатации

Страница: 6 / 16

2.
Adjust the Handle Assembly
NOTE: Valve Operation. Water will flow from a single shower accessory when the
handle lines up with any of the large detents on the escutcheon. Water will flow from
two accessories at the same time when the control knob detent lines up with a small
escutcheon detent.
Ensure the valve stem adapter is lightly placed over the spline adapter.
Place the handle assembly over the valve stem adapter.
Turn on the water supply to the transfer valve.
Rotate the handle assembly until water begins to flow through the shower
accessory.
Determine the shower accessory that will correspond to the Accessory
″
A
″
setting
at the 12 o’clock position on the escutcheon.
Turn the handle to the detent setting that corresponds with Accessory
″
A.
″
The
handle should be in the vertical 12 o’clock position.
Remove the handle assembly and set aside.
To adjust for handle alignment:
NOTE: The spline adapter allows fine adjustment of the handle alignment.
Remove the handle assembly and the valve stem adapter.
Reposition the spline adapter.
Reinstall the handle assembly and the valve stem adapter.
Check the alignment. Repeat this procedure until the handle alignment is
satisfactory.
A
C
B
B
A
C
Transfer Valve
Valve de transfert
Válvula de transferencia
Handle Assembly
Ensemble de poignée
Montaje de manija
Valve Stem Adapter
Adaptateur de tige de valve
Adaptador de la espiga de la válvula
B + C
A + B
A + C
Accessories
Accessoires
Accesorios
Spline Adapter
Adaptateur à cannelures
Adaptador de ranuras
Mixed Water Supply
Alimentation d'eau mélangée
Suministro de agua mezclada
Accessories and Combined Accessories
Accessoires et accessoires combinés
Accesorios y accesorios combinados
1118191-2-A 6 Kohler Co.