7. Surface-Mount - Secure the Cabinet
NOTE:
The following instructions are for surface-mount only. For recess-mount installation, refer to the
″
Recess-Mount
″
sections.
Slide a clip onto each end of the top T-slot.
Center the cabinet on the wall as desired.
Using a 3/32
″
drill bit, drill pilot holes into the wall.
If anchors are needed, remove the cabinet and install anchors into the wall at the pilot hole
locations.
Secure the clips with 1-1/2
″
screws (provided).
Slide two clips onto the bottom T-slot.
Position each clip 2
″
(51 mm) from the ends of the cabinet.
Using a 3/32
″
drill bit, drill pilot holes into the wall.
If anchors are needed, remove the cabinet and install anchors into the wall at the pilot hole
locations.
Secure the clips with 1-1/2
″
screws (provided).
3/32"
3/32"
2" (51 mm)
Kohler Co.
11
1337913-2-A
Содержание K-99003-TLC
Страница 62: ...1337913 2 A ...
Страница 63: ...1337913 2 A ...
Страница 64: ...USA Canada 1 800 4KOHLER México 001 800 456 4537 kohler com 2018 Kohler Co 1337913 2 A ...