Kohler K-8802, Руководство по установке

Страница: 6 / 20

4. Complete the Installation
From underneath the sink:
Loosen the clamping screw from the clamping link of the ball
lever assembly. Do not completely remove the clamping screw.
Rotate and align the holes of the connecting link to the lift rod.
Insert the lift rod through both holes of the connecting link.
Approximately 1/2
″
(1.3 cm) of the lift rod should be exposed
from the bottom of the connecting link.
Securely tighten the clamping screw.
Lift and hold the rod of the ball lever assembly upward.
Securely tighten the tailpiece onto the strainer body.
From above the sink:
Align the open edge of the stopper with the rod of the ball lever
assembly inside the tailpiece, as illustrated.
Rotate the stopper clockwise until the stopper locks into place
onto the rod of the ball lever assembly.
Push the lift knob down to release the stopper.
Place the strainer on top of the stopper.
Ball Lever
Assembly
Connecting
Link
Clamping
Screw
Approximately
1/2" (1.3 cm) of
the lift rod should
be exposed.
V-Clip
Lift Rod
Stopper
Strainer
Ball Lever
Assembly
Align slot of
stopper assembly
with rod lever and
turn clockwise.
110468-2-A 6 Kohler Co.