1380417-T01-A
-4-
INSTALLATION
安装
STEP
7
STEP
8
STEP
9
STEP
10
1. Check that the stopper is properly installed and then install the internal and the external
hinge covers.
1.
检查铰链限位件是否已预装好，确认后扣上铰链内外侧盖板；
Install the internal cover while opening the door
outward.
Install the external cover while opening the door
inward.
门往外打开时，装好铰链内侧的盖板；
门往内打开时，装好铰链外侧的盖板。
Door opened inward
门往内打开状态
Stopper
铰链限位件
Check if the stopper is correctly and securely
installed when installing the cover
在安装铰链外盖时，
检查铰链限位件是否安装
好，以确保无脱落
1. Install the magnetic seal and the weather bar.
IMPORTANT:
Install the hinge cover before the side weather bar.
1.
装好磁条，挡水胶条。
重要：
在安装侧挡水胶条前，先扣好铰链盖板。
Cut the bubble seal according to the actual
height of the glass to avoid the installation
positions of the hinges
泡泡胶条需根据实际玻璃高度剪断，用以避开铰
链安装位置
Install the waterproof part before the side
weather bar
防水密封件在安装侧挡水胶条前须装好
Install the bottom weather bar assembly
门底挡水胶条组件安装
1. Install decorative covers on all jambs.
2. Install the handle assembly onto the door glass.
1.
将型材装饰盖全部装好；
2.
将把手组件安装在门玻上。
1. Apply glass cement both inside and outside as shown in the figure below.
1.
按下图所示，在淋浴房里外都打上玻璃胶。
Install the handle onto the door
glass
将把手安装在门玻上
Decorative top cover for the inter glass
扣夹固玻型材装饰盖
Decorative cover for the
inter glass
夹固玻型材装饰盖
