a)
If the intelligent toilet will be idle for a long term, make sure the water in pipeline of cover is drained completely:
Disconnect the power plug, and turn off the tee valve. Press the release button of heating pipe, exhaust
the water inside heating pipe with a small and long rod.
Disconnect the power plug
Notes:
1.
If water is not completely drained and meanwhile the product is idle for a long time, the residual water may
freeze in Winter or go bad in Summer.
2.
If you find the water supply pipe has been frozen, do not use the intelligent cover. You will need to raise
the room temperature and use it after the water is thawed.
4.
Before use after long term idle condition, please close the tee valve and then press it again for flushing.
5. Before use after long term idle condition, make sure to wash it for several times and the inner pipelines are
clean.
6.
In case of long term idle status, remove the batteries in the charging block of remote control.
3.
When the temperature in Winter exceeds the normal working temperature, and there is a risk of freezing in
water pipe, please turn off the tee valve and
perform one flush to the toilet
.
E.
Maintenance in case of long-term idle status
b) Open cover or add water inside the toilet might avoi the plastic parts yellowing problem caused by backflow
air from discharge pipe after residual toilet water evaporated during long-term idle status.
1413476-TW01-A
20
Kohler Co.
