STARTING THE UNIT
If the unit does not function properly, please refer to the
"Troubleshooting" section.
Touch the electronic drain on/off button "
" on the
panel to close the drain, and the pink light flashes.
Fill the bath to a level at least 2" (5 cm) above the
bubble hole.
Observe water temperature displayed on the panel
for comfort and safety.
Carefully enter the bath basin.
Touch the pump on/off button "
" on the user
keypad.
Observe that the air system starts and air begins to
flow to all zones.
If necessary, slide the sliding panel to adjust the
airflow.
!
!
!
!
!
!
!
NOTE:
Before operating the panel, please
confirm that there is no obvious water stains on
the panel. If there is any, please first wipe it clean.
!
!
!
!
!
!
!
/
2"(5
)
/
OPERATING YOUR BATH WITH AIRJETS
38 c
o
-
+
Manual Purge
Electronic Drain On/Off
/
Pump On/Off
/
Water Temperature
/
Decrease/Increase Flow
OVERFLOW STATUS
!
!
!
Water level reaches overflow level.
The electronic drain "
" automatically opens.
Green light flashes and sound alarm starts.
Turn off the tap. When water level is below overflow
level, the electronic drain automatically closes.
Sound alarm stops and pink light flashes, (Refer to
"Roughing-in" for specific overflow level of each
bath.)
!
!
!
(
)
6
-T01-B
1200098
