Kohler K-3901, Руководство для владельцев жилья

Страница: 12 / 68

Servicing the Cleansing Wand
NOTE: The cleansing wand spray tip can become clogged with mineral deposits from the water, reducing
spray performance. The spray tip should be cleaned periodically. The length of time between each cleaning
will depend on water quality.
Select [settings] .
Select [cleaning] .
Select [manual clean] .
Select [extend wand] . The cleansing wand will deploy.
Manually clean the wand.
Remove the wand spray tip by inserting a small thin object into the hole on the underside of the
wand, pushing the spray tip up.
Inspect the spray tip. If there is mineral buildup in the spray tip, remove the minerals by soaking
the spray tip in a cleaning solution until the minerals are gone.
Remove any mineral deposits from the spray tip opening in the cleansing wand.
Replace the spray tip if needed.
Reinstall the spray tip once it is clean or install a new spray tip. Make sure the tip is flush with the
surrounding surfaces on the wand. If the spray tip is not flush, it may be damaged or stick as the
wand retracts.
Select [close] when the spray tip has been reinstalled.
Select [home] to return to the main screen or [back] to return to the previous screen.
Spray Tip Cleansing
Wand
1212876-5-F 12 Kohler Co.