1. Remove the Existing Toilet
Turn off the water supply.
Flush the toilet, then sponge out all remaining water from the
tank.
Disconnect the supply shut-off valve (if present), and remove the
old tank and bowl.
Remove the old wax seal from the floor with a putty knife.
Replace the old T-bolts with the new 5/16
″
diameter T-bolts.
CAUTION: Risk of hazardous gases.
If the new toilet is not
installed immediately, temporarily stuff a rag in the closet flange.
T-Bolt
Scrape off the old
wax seal
Closet
Flange
Kohler Co.
3
1021799-2-B
