3. Above-the-Counter – Prepare the Site
Cut along the
above-the-counter cut-out line
on the cut-out
template with a scissors.
Using the centerlines as a guide, squarely position the cut-out
template on the countertop. Ensure there is adequate clearance
between the lavatory, faucet, and backsplash.
Use a pencil to trace around the
above-the-counter cut-out line
on the countertop.
NOTE:
Ensure the faucet spout will reach a minimum of 4
″
(10.2
cm) over the rim of the lavatory and the stream of water is directed
toward the center of the lavatory basin.
Recheck the clearance between the lavatory, faucet, and
backsplash. Adjust the traced cut-out line, if necessary.
Use a pencil to mark the exact centers of the four mounting hole
locations on the countertop.
Remove the cut-out template.
Cut along the inside of the marked pencil line for the lavatory
with a jigsaw.
Drill the four 3/8
″
(1 cm) mounting holes at the marked centers.
Outside Edge
of Lavatory
Above-the-Counter
Cut-Out Line
Backsplash
Kohler Co.
7
1061941-2-B
