Tools and Materials
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of personal injury or product damage.
Cast
iron lavatories are very heavy. Get help lifting the lavatory into
place.
Observe all local plumbing and building codes.
If you are replacing an existing lavatory, turn off the water supply
to the faucet. Open the faucet valves to relieve pressure, then
disconnect the supply lines. Disconnect the drain assembly,
remove the trap, then remove the lavatory.
For new installations, ensure the water supply lines, drain piping,
vanity, and/or countertop is in place before proceeding with the
lavatory installation.
When selecting a faucet for the lavatory, ensure the spout will
reach a minimum of 4
″
(10.2 cm) over the rim of the lavatory and
the stream of water is directed toward the center of the lavatory
basin. A wall-mount faucet is recommended.
Never rest or store the lavatory on the drain surface.
Prior to installation, unpack the new lavatory and inspect it for
damage. Return the lavatory to its protective carton until you are
ready to install it.
Pencil
Scissors
Drill
• Template (supplied)
• Rags or Paper Toweling
• Assorted Drill Bits
• Marker
Plus:
Tape
Measure
Safety
Glasses
Silicone
Sealant
Jigsaw
Masking Tape
Adjustable
Wrench
1061941-2-B
2
Kohler Co.
