Kohler K-22681T-NA, Руководство пользователя, Страница: 15 / 31

1368348-T01-A
-13-
8.3 Lighting
1) Touch the Lighting button , and the corresponding button
lights up. The light can be turned on or off at any time (while
the door is closed).
is off (the button lamp turns off).
Is on (the button lamp turns on).
2) When a mode starts, the light turns on and automatically
turns off 2 minutes later (for energy saving purpose).
3) When the door is open, the light should turn on (automatically
turns off 2 minutes later). After the door is closed, the light
resumes to the previous state before the door is opened. If
the light was off at that time, it should still be off after the door
is closed.
4) While the door is open, the light keeps on (and cannot
be manually turned off). If the door keeps open for over 2
minutes, the light will automatically turn off 2 minutes later.
8.4. Child Lock Function
The child lock button is used to lock the screen
Lock: press the child lock button for 1.5 seconds to lock the
screen. In the locked state, the child lock icon
lights up on
the display screen, and the child lock button is highlighted;
At this point, if you touch other buttons, the
DWVVQPƀKEMGTU
prompting the locked state.
Unlock: In the locked state, press the child lock button for 1.5
seconds to unlock. After unlocking, the child lock button turns off
(30% brightness), and the child lock icon
does not light up
either on the display screen.
8.5 Memory Function
8.5.1 Mode Storage
After the function stops work, the time digital tube 88:88 displays
End. Without touching other buttons, touch the memory button
to store the parameters such as the current baking mode,
the operating time and the temperature. At this point the
temperature digital tube shows C1.C2.C3.C4 (rear alignment),
and tentatively up to 4 programs can be stored. It automatically
displays the serial numbers, and replacing the earliest one
when exceeded. Assuming that no content is currently stored in
C1.C2.C3.C4, a invalid sound is given when the start button is
touched.
During the storage process, long pressing the memory button
YKNNƀKEMGT#HVGTVJGƀKEMGTKPIKUEQORNGVGFVJGUVQTCIGJCU
been completed, requiring the display screen to exit the display
and return to the standby state.
8.5.2 Memory Recall
In the standby interface, after a short pressing , the
memorized menu (default display C1) can be recalled, and the
8.3
撑僈抧⸆腊
1)
鍘䷫撑僈抧䭽ꝶ 㼆䎾涸䭽ꝶ抧挿❭抧〳⟄㖈⟣䠑傞ꢂ
꡶Ⱒ꡻朐䙖♴䒓゗♸Ⱒ꡻ Ⱒ꡻朐䙖䭽ꝶ抧抣
䒓饰朐䙖䭽ꝶ抧❭կ
2)
䔲垷䒭䒓㨤鵘遤傞撑僈抧挿❭
2
ⴔꛦた荈⸓擆抣蒜腊կ
3)
䒓꡶傞撑僈抧䎾挿❭
2
ⴔꛦた荈⸓擆抣Ⱒ꡶た撑僈抧
朐䙖䎾騈ꥥ⾲䒓꡶⵸朐䙖㥵卓⾲勻僽Ⱒ꡻涸ⴭⰢ꡶た鵮僽
Ⱒ꡻կ
4)
㖈䒓꡶涸朐䙖♴撑僈抧䭯絯挿❭⚂♶腊䩛⸓Ⱒ꡻㥵卓
꡶䭯絯䩧䒓
2
ⴔꛦ⟄♳ⴭ
2
ⴔꛦた撑僈抧荈⸓擆抣կ
8.4
留ꝉ⸆腊
留ꝉ䭽ꝶ欽✵ꝉ⡞㾓䍋
♳ꝉꟋ䭽留ꝉ䭽ꝶ
1.5
猲ꝉ⡞㾓䍋㖈ꝉ㹁朐䙖♴儑爙㾓留
ꝉ㕃叻 挿❭⚂留ꝉ䭽ꝶ넞❭姼傞㥵卓鍘䷫Ⱖ➭䭽ꝶ傞
䭽ꝶ꡸捌䲿爙ⴀ✵ꝉ⡞朐䙖կ
鍒ꝉ㖈ꝉ㹁朐䙖♴Ɤ䭽留ꝉ䭽ꝶ
1.5
猲鍒ꝉ鍒ꝉ絕勲た
留ꝉ䭽ꝶ抧Ⱒ꡻
(30%
❭
)
儑爙㾓留ꝉ㕃叻 ♶❭կ
8.5
雵䗴⸆腊
8.5.1
垷䒭㶸⪰
㖈⸆腊鵘遤絕勲た傞ꢂ侨瀦盗
88:88
儑爙
End
㖈劢䭽⸓Ⱖ➭
䭽ꝶ涸䞔ⲃ♴鍘䷫雵䗴ꝶ 㶸⪰䔲⵸捷掐垷䒭ծ鵘遤傞ꢂծ
庛䏞瘝⿬侨姼傞儑爙㾓庛䏞侨瀦盗儑爙
C1.C2.C3.C4
た㼆룅
兽㹁剒㢴〳㶸
4
⚡玐䎸荈⸓儑爙㶸侨곡䎸〿馄ⴀた䪾剒傍
涸♧⚡剏䰃䱈կ⧺霃
C1.C2.C3.C4
䔲⵸尵剣㶸⪰ⰻ㺂ⴭ鍘䷫゗
⸓䭽ꝶ䫣偽佪갉կ
㶸⪰鵂玐⚥Ɤ䭽雵䗴ꝶ꡸捌꡸捌㸤䧭た➿邍㶸⪰䊺㸤䧭銳宠
儑爙㾓鷍ⴀ儑爙鵥㔐ⵌ䖉劼朐䙖
8.5.2
雵䗴靈》
㖈䖉劼歲꬗瀊䭽 た〳靈》䊺雵䗴涸蝲靶랾雩儑爙
C1
〳鸑鵂靈侮䭽ꝶ 佖」侨㶶㖈䭽゗⸓  ꝶ擆
存储过程中长按记忆键闪烁，闪烁完成后代表存储已完成，显示屏
退出显示返回到待机状态。