Preparation – Above-Counter Lavatory
CAUTION: Risk of personal injury or product damage.
Handle with care.
Product can break, chip, or cause injury if handled carelessly. Get help lifting the
lavatory.
IMPORTANT! This lavatory basin must be supported properly.
Do not install the
lavatory basin as a wall-mount, undermount, or self-rimming lavatory.
For the recommended lavatory height of 33-3/4
″
(85.7 cm), the centerline of the
wall backing must be 30-1/16
″
(76.4 cm) from the finished floor. For height
variances, adjust the wall backing and centerline height accordingly.
Install sufficient backing behind the finished wall to provide adequate support to
secure the mounting hardware.
Install the water supplies and drain piping according to the roughing-in
information.
Cut out the template along the cutout line.
Position the template on the countertop. Tape it securely, and trace the template
on the coutertop using a soft lead pencil.
Cut out the opening by carefully cutting inside the pencil line traced from the
template.
Temporarily set the lavatory into the cutout to check fit. Remove the lavatory and
make any necessary adjustments.
Verify that the cabinet is level to ensure proper installation.
2
9
-3/4"
(75.6 cm)
Min.
2
9
-3/8"
(74.6 cm)
*33-3/4"
(85.7 cm)
*Recommended overall height.
Height may be adjusted to
accommodate various applications.
*Hauteur générale recommandée.
Hauteur ajustable pour accommoder
des applications diverses.
*Altura total recomendada.
Se puede ajustar la altura para
acomodar diversas aplicaciones.
21" (53.3 cm)
Min.
Cut along line.
Découper le long de la ligne.
Corte sobre la línea.
Install backing.
Installer de renfort.
Instale del refuerzo.
Trace the cut-out.
Tracer la découpe.
Trace la abertura.
1087250-2-C
12
Kohler Co.
Содержание K-14228
Страница 19: ...Kohler Co 1087250 2 C ...
Страница 20: ...1087250 2 C ...