Product Information
Applicable product:
Drop-in rim style with heater
K-1375-H2
Fixture*:
Bathing well:
Basin area, bottom
50
″
(127 cm) x 29
″
(73.7 cm)
Basin area, top
61
″
(154.9 cm) x 32
″
(81.3 cm)
Weight
130 lbs (59 kg)
To overflow:
Water depth
16
″
(40.6 cm)
Capacity
100 gal (378.5 L)
* Approximate measurements for comparison only.
Included component:
Cut-out template
113311-7
Pump: variable
V
A
Heater: 1.5 kw
240
11
Minimum access panel
pump/control (required):
34
″
(86.4 cm) W x
15
″
(38.1 cm) H
Required accessories:
Jet trim kit
K-9698
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD):
Pump/control
208-240 V, 20 A, 50/60 Hz
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of 48
lbs/square foot (231 kg/square meter) loading.
Hot water supply should be 70% of capacity or greater.
Installations will vary.
If installing a rim-mount faucet, make sure there is no interference
with drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
Fixture conforms to ANSI Standard Z124.1.2. All dimensions are
nominal.
1-1/2" OD
42" (106.7 cm)
3-1/2" (8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
36" (91.4 cm)
72" (182.9 cm)
Recommended faucet area.
Note:
The Pump protrudes beyond the rim.
6-1/2"
(16.5 cm)
13-1/2"
(34.3 cm)
22"
(55.9 cm)
Pump/Control Access
34" (86.4 cm) W x
15" (38.1 cm) H
2-1/4"
(5.7 cm)
3" (7.6 cm) x 24" (61 cm)
Flat Faucet Deck
No change in measurements if connected with
drain illustrated. (K-7161-AF or K-7161M-AF)
1019740-1-D
2
Kohler Co.
