Product Information
Applicable product:
Bath whirlpool with integral
apron, left drain
K-1122-LA
shown
Bath whirlpool with integral
apron, right drain
K-1122-RA
not shown
Fixture*:
Bathing well
Basin area bottom
45-1/8
″
(114.6 cm) x 19-11/16
″
(50 cm)
Basin area top
52-3/4
″
(134 cm) x 25-5/16
″
(64.3 cm)
Weight
135 lbs (61.2 kg)
To overflow
Water depth
15
″
(38.1 cm)
Capacity
58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump:
Hp
V
Hz
A
1-speed
1.25
120
60
7
Pump is supplied with 24
″
(61 cm) grounding-type plug-in
cord.
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control
120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24
″
(61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected
with drain illustrated. (K-7272)
1/2" (1.3 cm) R.
1-1/2" OD
60" (152.4 cm)
Integral Flange
Detail
1-1/4"
(3.2 cm)
16"
(40.6 cm)
2-1/2"
(6.4 cm)
3/4"
(1.9 cm)
11-1/4"
(28.6 cm)
19"
(48.3 cm)
1-1/4"
(3.2 cm)
32" (81.3 cm)
1063752-1-B
2
Kohler Co.
