Kohler K-10268, Руководство по установке и эксплуатации

Страница: 7 / 20

Installation/Installation/Instalación
Care and Cleaning
For best results, keep the following in mind when caring for your KOHLER product:
•
Use a mild detergent such as liquid dishwashing soap and warm water for
cleaning. Do not use abrasive cleaners that may scratch or dull the surface.
•
Carefully read the cleaner product label to ensure the cleaner is safe for use on the
material.
•
Always test your cleaning solution on an inconspicuous area before applying to
the entire surface.
•
Do not allow cleaners to sit or soak on the surface.
•
Wipe surfaces clean and rinse completely with water immediately after cleaner
application. Rinse and dry any overspray that lands on nearby surfaces.
•
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a
brush or scouring pad to clean surfaces.
For detailed cleaning information and products to consider, visit www.kohler.com/clean.
To order Care & Cleaning information, call 1-800-456-4537 and press 1 for Kohler
Products and then 3 for Literature.
a
Check for leaks.
Vérifier s'il y a des fuites.
Verifique que no haya fugas.
Cold
Froid
Fría
Hot
Chaud
Caliente
Connect and tighten the
supply hoses.
Connecter et serrer les
tuyaux d'alimentation.
Conecte y apriete las
mangueras de suministro.
6
7
Reinstall aerator.
Réinstaller l'aérateur.
Vuelva a instalar el
aireador.
a
b
b
5
Remove aerator.
Retirer l'aérateur.
Quite el aireador.
Flush lines.
Vidangez les
conduites.
Haga circular agua
en las líneas.
Install Faucet
cont.
/Installer robinet
cont.\
Instale la grifería
cont.
Kohler Co. 7 1018258-2-H