12
TT-1618 6/14
15.
Test the connection (Mac
r
computer).
15.1
Click on the Apple
r
icon.
15.2
Click on System Preferences.
15.3
Click on the Network icon.
15.4
Click on the Ethernet connected icon. Verify that
Ethernet is in the connected state, indicated by a
green dot.
15.5
Change Configure IPv4 to Using DHCP.
15.6
Click Apply.
15.7
Proceed to step 16.
16.
Disconnect from wireless.
16.1
Click on wireless symbol.
16.2
Click on the customer’s wireless.
16.3
Click Disconnect. The wireless symbol should
change from
to
and you should be able to
get onto the Internet. Go to KOHLERPower.com
or another known website to verify the Internet
connection.
16.4
Disconnect the laptop from the wireless access
point.
Figure 25
Disconnect from Wireless
17.
Connect the LAN port on the PoE box to
the generator set’s network cable.
A network cable is provided on the generator set and
factory-connected to the generator controller. See
Figure 5, Figure 6, or Figure 7 for the PoE box and
network cable locations on the generator. See Figure 2
for the location of the LAN port on the PoE box.
18.
Return the generator set to service.
18.1
Reconnect the generator set engine starting
battery, negative (--) lead last.
18.2
Replace the air intake panel on the enclosure (if
removed).
18.3
Reconnect utility power to the generator set.
18.4
Set the time, date, and exercise on the controller.
See the generator set Operation Manual for
instructions, if necessary.
18.5
Press AUTO on the generator set controller.
