For tile, wood, or other porous
materials, apply waterproof sealant
around the cutout area of the
countertop surface. Follow all
manufacturer's instructions and
warnings. Allow the sealant to dry
before proceeding.
Use a 50/50 mixture of isopropyl
alcohol and water to clean the
countertop surface around the cutout
area. Wipe dry with a clean cloth.
: Install the adhesive sealant
when the temperature is at least 10 C.
The preferred temperature range to
apply the adhesive sealant is 21 C to
38 C.
Loosely apply the adhesive sealant
around the entire countertop cutout so
it is alongside the cutout hole. Adjust
the placement of the sealant before
removing the backing material. Cut off
any excess seal material. Carefully
remove the adhesive seal backing
material.
NOTE
o
o
o
50/50
10
21
38
Adhesive
Sealant
Fig.#4
4
Drill the faucet holes.
Install the faucet to the countertop according to the
manufacturer's instructions.
Install the drain to the lavatory according to the installation
instructions included with the drain. Apply a sufficient amount
of clear silicone sealant when you install the drain.
Fig.#3
3
Kohler
Cut out the opening by carefully
following the pencil line.
Large lavatories are very heavy.
Get help lifting the lavatory into
place.
Temporarily position the lavatory in the
countertop cutout so the "Kohler" logo
is visible. The logo is located inside the
basin, near the rim, and should be
positioned near the faucet.
Verify proper clearance between the
lavatory, faucet, and backsplash.
Remove the lavatory from the
countertop cutout, and return it to its
protective carton. Do not stand or store
the lavatory on the drain surface.
CAUTION: Risk of personal
injury or product damage.
-3-
1148744-T01-A
