11. Install the Remote Control - Residential
NOTE:
A screw and washer designed to make the docking station tamper resistant are provided. Go to
the
″
Install the Remote Control - Commercial
″
section for instructions.
Determine the desired location of the remote control docking station.
Position the mounting bracket in the desired location and mark the location of the screw holes.
Remove the mounting bracket.
Drill 1/4
″
holes at each of the screw locations.
Install an anchor in each of the holes.
Attach the mounting bracket to the wall using the two supplied screws.
Place the remote control on the docking station.
Install the batteries in the docking station (consult the Homeowners Guide for instructions if
needed).
Attach the docking station to the mounting bracket.
To pair the remote control to the toilet, consult the Homeowners Guide for instructions.
Docking Station
Remote Control
Screw
Anchor
Docking
Station
Mounting Bracket
38" (965 mm) –
66" (1676 mm)
36"
(914 mm)
1295780-2-A
14
Kohler Co.
