Kohler Command 6 HP XKE Series, Руководство пользователя

Страница: 4 / 16

4
Retractable
Starter Handle
Retractable
Starter Housing
Cooling Air Intake
Run-Stop Switch
Choke Lever
Air Cleaner
Cover
Air Cleaner
Cover Knob
Figure 1. Location of Controls and Service Points on C6.
Oil Recommendations
Using the proper type and weight of oil in the crankcase
is extremely important. So is checking oil daily and
changing oil regularly. A minimum of 22 ounces
(651 mL) is required. Failure to use the correct oil, or
using dirty oil, causes premature engine wear and
failure.
Oil Type
Use high quality detergent oil of API (American
Petroleum Institute) service class SG, SH, SJ or
higher. Select the viscosity based on the air
temperature at the time of operation as shown in the
following table.
NOTE: Using other than service class SG, SH, SJ or
higher oil or extending oil change intervals
longer than recommended can cause engine
damage.
A logo or symbol on oil containers identifies the API
service class and SAE viscosity grade. See Figure 3.
*Use of synthetic oil having 5W-20 or 5W-30 rating is
acceptable.
**Synthetic oils will provide better starting in extreme
cold (below -10°F).
Figure 2. Viscosity Grades Table.
**
*
Figure 3. Oil Container Logo.
Refer to “Maintenance Instructions” beginning on
page 7 for detailed oil check, oil change, and oil
filter change procedures.