-12-
TEST OPERATION
5-10
2"
51 mm
5
·
·
·
·
·
Test Run the Bath
NOTICE:
When testing the heated surface functions,
allow 5 to 10 minutes to begin feeling heat on the end
wall.
Operate the heated surface user keypad to test the
temperature settings.
Fill the bath at least 2" (51 mm) above the top of the
highest whirlpool jet.
Operate the bath for 5 minutes and check all piping
connections for leaks. Check for leakage along the
front, sides, and back of the bath.
Turn on each of the bath features, and verify proper
function.
Turn off the features, then completely drain the
water from the bath.
·
·
·
·
·
Whirlpool System
Heated Surface Control
Air System
1397340-T01-A
