KOHJINSHA KP-1, Инструкция по эксплуатации, Страница: 7 / 9

- 7 -
● P6 Mode (Factory Setup)
If you want to reset to factory setup, choose 0
with FWD or REF button, and then press DEL. If
you press DEL when 1 was shown, the
operation is canceled.
Factory setup values
SWR protection: Lock mode
0
SWR protection threshold value
2.0
FWD and REF offset value
0
A/D calibrate mode voltage display
6 times(0 to 30V)
peak hold time
300ms
● P7 Mode (For Technician)
This mode isn't used usually.
Under the calibration mode you can select 1 or
6. 6 means multiply 6 times when displaying
A/D input voltage.
Operation Tips
FWD button : up
REF button : down
DEL button : Select/Determine
Power off : Cancel