KOHJINSHA KP-1, Инструкция по эксплуатации, Страница: 2 / 9

- 2 -
Thank you for purchasing KP-1.
In addition to the conventional power meter
features KP-1 has some new features that are
large cross meter, digital display, and protection
circuit to prevent your antenna and/or amplifier
from getting trouble.
Please read this manual carefully before you start
using KP-1. We would like you to use KP-1 as long
as possible.
■ Features
●
KP-1 is SWR/POWER meter using current
transformer to pick up RF of ranging from
1.8MHz to 30MHz.
● KP-1 has a large analog cross meter and 7
segment blue LEDs that help
your easy reading
power & SWR
.
● KP-1 has four positions of power range. You can
choose a proper range for your output power.
●
Digital display can show not only power but
SWR.
● You can read PEP with pressing the PEP button
when you operate SSB. You may not lose your
voice with this function. You can setup hold
time as you like.
● Protection circuit works when the SWR
becomes higher than the level you set. You can
set this
threshold
level between SWR 1.4 and
2.5.
Table of Contents
Front Panel
・・・・・・・・・・・・・・
3
Rear Panel
・・・・・・・・・・・・・・・
4
Preparation before using
・・・・・・・・・
5
■
Operation
FWD Power measurement
・・・・・・・・・
5
REF Power measurement
・・・・・・・・・
5
SWR measurement
・・・・・・・・・・・・
5
PEP power measurement
・・・・・・・・・
5
Effective power measurement
・・・・・・・
5
■
Setting up parameters
P1 mode
・・・・・・・・・・・・・・・・
6
P2 mode
・・・・・・・・・・・・・・・・
6
P3 mode
・・・・・・・・・・・・・・・・
6
P4 mode
・・・・・・・・・・・・・・・・
6
P5 mode
・・・・・・・・・・・・・・・・
6
P6 mode
・・・・・・・・・・・・・・・・
6
P7 mode
・・・・・・・・・・・・・・・・
7
Specifications
・・・・・・・・・・・・・・
8