KOHJINSHA KP-1, Инструкция по эксплуатации, Страница: 3 / 9

- 3 -
■
Functional Overview- Front Panel
1. Cross Meter
You can read FWD/ REF power and SWR with
this analog meter. The crossing point of needles
shows the SWR value.
2. Digital Display
You can select functions with the buttons below
the display. When the function is selected, the
button shines blue.
3. FWD Button
Digital display shows FWD power when this
button is pressed.
4. REF Button
Digital display shows REF power when this
button is pressed.
5. SWR Button
Digital display shows SWR when this button is
pressed.
6. PEP Button
This switch toggles between average power and
PEP power. When it is showing PEP, it lights
blue.
7. DEL Button
Digital display shows the power going into your
antenna FWD-(minus)REF when this button is
pressed.
8. PROTECT Lamp
When the SWR becomes higher than the value
you set up, it is activated. When activated, the
connection between 12 TX GND and 13 RELAY
IN is disconnected inside of KP-1.
9. POWER Switch
This switch is used to turn on the KP-1.
The button shines red when the power supply is
on.
10. Range Select
You need to choose the proper range in order
for the analog meter needles not to jump off
scale. You don't have to think about power
range for digital display.