KOHJINSHA KL-1, Инструкция по эксплуатации

Страница: 35 / 48

１4．Specifications
Frequency Range １. ８００MHz 〜 １ １. ９９９MHz
１ ３. ５００MHz 〜 １ ３. ６６０MHz
３. ６６０MHz 〜 １ ３. ９９９MHz
２１. ０００ ７. ０００MHz 〜 ７. １１０MHz
７. １１０MHz 〜 ７. ３００MHz
１０. １００MHz 〜 １０. １５０MHz
１４. ０００MHz 〜 １４. １５０MHz
１４. １５０MHz 〜 １４. ３５０MHz
１８. ０６８MHz 〜 １８. １６８MHz
２１. ０００MHz 〜 ２１. ２１０MHz
２１. ２１０MHz 〜 ２１. ４５０MHz
２４. ８９０MHz 〜 ２４. ９９０MHz
２８. ０００MHz 〜 ２８. ３００MHz
２８. ３００MHz 〜 ２９. ７００MHz
Operating Temperature Range ０℃ 〜 ＋４０℃
Input Impedance ５０Ω Unbalanced
Maximum Tuning Time Approximately 30 seconds
（ From 1.8MHz to 28.300MHz or vice versa.）
( Move to next band takes only a few seconds.)
Supply Voltage ＡＣ２００〜 ２４０Ｖ（Single phase ５０ / ６０Ｈｚ）
Ground Minus ground
Maximum Driving Power ２００Ｗ
Maximum Output Power ＣＷ / RTTY / SSB(PEP)： 4KW (see NOTE)
Undesired Spurious Suppression Less than − ４０dB
Dimension Main Unit ：Width４７８×height８００×Depth５６４ . mm
( Any object that come out from the surface are not included to measure.)
Controller ：Width３２０×Height１０７×Depth１８７．５mm
( Any object that come out from the surface are not included to measure.)
Weight Main Unit ： 106kg
Controller ： 3.5kg
Note: You must follow your country ʼ s regulation regarding out put power.
※Specifications were measured in the way that JAIA(Japan Amateur Industrial Association).
※Specifications, outside appearances may be changed to improve without any notice.
※Tuning time may change according to load condition.
- 34 -