KOHJINSHA KL-1, Инструкция по эксплуатации

Страница: 31 / 48

10．PC Connection and Setting
10-2 ＰＣ Connection
Make
Transceiver Memory Setting Note
ICOM CI-V
All ICOM
transceivers You don ʼ t have to setup for
ICOM transceivers.
Wiith Logger32 in case KL-1
switches to another band,
and come back quickly to the
original band while tuning
your transceiver frequency
dial, turn off CI-V transceiver
of your ICOM transceiver. If
you set so, KL-1 doesn
ʼ t
coordinate with your
transceiver without Logge32.
YAESU FT-1000MK-V
FT-1000MP
FT-1000 03:Logging Soft
Choose the logging software
that you want to use.
To user HAMLOG you need to put
check mark for FT1000MP in
HAMLOG input configuration, and
set the timer command 5.
Make sure the CAT indicator
of your transceiver is blinking.
If CAT indicator is not blinking,
tracking function doesn
ʼ t
work.
When you use HAMLOG, you
should have HAMLOG input
window, otherwise CAT
doesn
ʼ t work.
YAESU FTDX-9000
FT-2000
FTDX-5000 03:Logging Soft
Choose the logging software
that you want to use
To use HAMLOG you need to put
check mark for FT2000/9000 in
input configuration , and set the
timer command 0.
Select KENWOOD in HAMLOG
configuration.
You may have trouble of
tracking function depending
on how you use the logging
software.
KENWOOD TS-950
TS-850
00:Exciter Type
Select
007:TS950/850̲AI、
03:Logging Soft
choose your logging
software. Turn power transceiver on,
and KL-1 on, then initialize
your logging software. Make
sure you see the transceiver
frequency(RX band) on
display.
KENWOOD TS-2000
TS-870
TS-480
TS-570
TS-990
00:Exciter Type
Select
005:KWD/K2/K3̲AＩ
03:Logging Soft
Choose your logging
software. Turn power transceiver on,
and KL-1 on, then initialize
your logging software. Make
sure you see the transceiver
frequency(RX band) on
display.
ＪＲＣ JST-145
JST245 Logging software is not
available.
- 30 -