KOHJINSHA KL-1, Инструкция по эксплуатации

Страница: 26 / 48

８．Controller Programming
8-5 Memory Setting Table
Setting Item Setting Details
00 : Exciter Type 000 : ICOM
001 : MK-V 1000MP
002 : FT-100
003 : FT-920
004 : KWD/K2/K3̲IF
005 : KWD/K2/K3̲AI
006 : TS950/TS850̲IF
007 : TS950/TS850̲AI
008 : JST-245̲RS
009 : JST-245̲Lin
010 : FT1000
011 : FT767
012 : Not Use
013 : Not Use
014 : Not Use
015 : YAESU IF
016 : YAESU AI
017 : FT-847
018 : Stand Alone
CI-V(All ICOM transceivers w/CI-V)
FT1000MP,MK-V,FT1000MP
FT-100
FT-920
TS2000,TS990,TS870,TS590,K2,K3
TS2000,TS990,TS870,TS590,K2,K3
0０5 is recommended, however 004 should work
better with 004 depending on logging software.
Choose 007 if your TS950SD(X) or TS850output
power becomes half with 1.6 second interval during
transmittion.
You lose memory frequency tracking with this
setting.
JST-145/JST-245
KL-1doesnʼt use this setting.
FT-1000D,FT1021
FT767
KL-1doesnʼt use this setting.
KL-1doesnʼt use this setting.
KL-1doesnʼt use this setting.
FT2000,FTDX5000,FTDX9000
FT2000,FTDX5000,FTDX9000
FT-847
In case of the your radio has rotary switch for band
selection, or the radio doesn
’
t have function to work
with KL-1 interface.
01 : Port1 BAUD Communication baud rate set up with transceiver
Select 1200bps〜38400bps
・YAESU transceiver,TS950, and TS850
004：4800
・ICOM
001：1200 〜 016：19200（recommended rate 008：9600）
・FT2000,FTDX5000,FTDX9000,TS2000,TS990,TS870,TS590 etc.
004：4800 〜 032：38400
02 : Stop bit Set stop bit number.
・YAESU、and 4800BAUD KENWOOD transceiver
02：2 stop bit
・Transceivers not listed as 2 stop bit.
01：1 stop bit
- 25 -