17
Low battery protection
When the drone's battery is low, the indicator will flash, and the rotors will slow down and
stop.
Over-current protection
If the drone's propellers become jammed, the control system will stop supplying power to
the rotors automatically. Cease use and turn off the drone and controller. Inspect the
propellers and replace/repair is necessary.
Factory reset
In the event the drone displays unusual flight characteristics, you can reset it back to factory
default settings by following the steps below:
Step 1:
Slide the power switch on the controller and the drone to the ON position.
Step 2:
When the drone's indicator changes from flashing rapidly to flashing slowly, push the left
control (throttle) lever to the highest position and then pull it back to the lowest position.
The indicator will then change from flashing slowly to a solid light.
ON
