14
3.
Clean the rolling brush completely.
4.
Use clean water to wash the rolling brush and its cover.
5.
After the cleaning is completed, pinch the brush lever with one hand, align the
other side of the brush with the right end cover, then put the lever end into the slot.
The brush is successfully installed. If the machine is not used immediately, the
brush can be placed in a ventilated place to dry before installation.
6.
After cleaning, align the snapshot on both ends of the brush cover with the slots on
both ends of the brush, rotate and press the brush cover lever until a click could be
heard.
Note:
Ensure the vacuum has been turned off before removing the roller brush cover.
