Kogan KASBDA20CA, Руководство пользователя

Страница: 17 / 24

HDMI IN 2 HDMI IN 1
HDMI IN
HDMI OUT
HDMI OUT (ARC)
HDMI OUT
STB (Set
Top Box)
Satellite or Network Set-top Box, or
BD/Blu-ray DVD Player
Note:
To play Dolby ATMOS signals to the soundbar:
1. Set the ATMOS device’s audio output to be “auto” or original code.
2. Connect the device’s HDMI OUT to the soundbar’s HDMI 1 or 2 input.
3. Connect the soundbar HDMI OUT (ARC) to the TV’s HDMI IN.
4. If connecting the device’s HDMI OUT to a TV, connect the TV’s HDMI ARC to
the ATMOS HDMI ARC port to share control with the soundbar (only power
on/off, previous/next track, mute and volume of soundbar can be controlled
by your TV remote). The device’s Optical output can be sent to the soundbar
as a Dolby Digital Plus signal, as Dolby ATMOS signals require large
bandwidth and cannot transfer by Optical or HDMI ARC.
Note:
•
While in OPTICAL/HDMI ARC mode, if there’s no sound output from the unit
and the status LED display flashes, you may need to activate PCM or Dolby
Digital Signal output on your source device (e.g. TV, DVD or Blu-ray player).
•
The unit may not be able to decode all digital audio formats from the input
source. In this case, the unit will mute. This is NOT a defect. Ensure that the
audio setting of the input source is set to PCM or Dolby Digital with HDMI
1/HDMI 2/HDMI ARC/optical input.