Kogan KASBDA20CA, Руководство пользователя

Страница: 12 / 24

1. Turn on the soundbar and press the INPUT button on the soundbar or remote
control to switch the soundbar to Bluetooth mode. The display on the soundbar will
show “ ” and begin flickering to show Bluetooth pairing mode.
2. On the Bluetooth device, switch on Bluetooth, search for and select KASBDA20CA
on your Bluetooth list to start connection (see the user manual of the Bluetooth
device on how to enable Bluetooth). If prompted for a password, use “0000”.
3. Wait until you hear the voice prompt from the soundbar. If successfully connected,
“ ” will stop flickering and is displayed on the display panel.
4. Select and play audio files or music on your Bluetooth device.
•
During play, if a call is coming, music play is paused. Play resumes when
the call ends.
• If your Bluetooth device supports AVRCP profile, on the remote control you
can press to skip to a track or short-press to pause/resume play. Hold the
PAIR button on the remote control for more than 2 seconds to disconnect
the paired Bluetooth device, or reconnect the most recent Bluetooth
device.
5. You can use the volume buttons on the soundbar or on the remote control to adjust
the volume to your requirements.
6. To exit Bluetooth, select another input source.
• When your switch back to Bluetooth mode, the Bluetooth connection will
remain active.
Note:
•
If you experience connection problems, remove KASBDA20CA from your
device's Bluetooth history and ensure it is less than 10 meters from the
soundbar, then try pairing again. To get the best sound quality, make sure
there is a clear line of sight between the connected device and your sound
bar.
•
If your pairing device or connected device is switched off or manually
disconnected, the soundbar will automatically enter pairing mode.
• The music streaming may be interrupted by obstacles between the device
and soundbar, such as a wall, metallic casing that obscures the device or
other devices nearby that operate in the same frequency.
• If you want to connect your soundbar with another Bluetooth device, press
and hold PAIR on the remote control to disconnect the currently connected
Bluetooth device.