Special Operation Notes
1. When the set time elapses, the appliance will automatically stop. However, the fan may
still run for a while until the heat reduces to a lower temperature. This is to prolong the
life of the circuit boards and other components within the appliance.
2. If you are required to pause the cooking, simply lift off the lid. Once this happens, the
appliance will pause. If you place the lid back onto the top of the base within 3 minutes,
the appliance will continue to operate the same program without pressing the CONFIRM
button. If you take longer than 3 minutes to place the lid back, you will need to re-
program.
3. You can set the time and temperature manually by pressing the CONFIRM button once,
followed by the TEMP button. The display screen will show 60
°
C as default. Press the
increase or decrease button to adjust the temperature as desired. Then to set the time,
press the TIME button, and the display screen will show 00:30 as default. Likewise, press
the increase or decrease button to adjust the time as desired.
◦
Both TEMP and TIME must be selected before you can press CONFIRM again to
start the appliance.
◦
The temperature range is between 60°C to 250°C, and the maximum cooking time
is 60 minutes.
◦
When in the TEMP mode, for every press of the increase or decrease button, the
temperature will be adjusted in 10°C increments.
◦
When in the TIME mode, for every press of the increase or decrease button, the
time will be adjusted in 1 minute increments.
◦
Holding down the increase or decrease buttons will allow a continuous increment
of the temperature or time.
4. At any time during the cooking process, you can cancel the program by pressing the
CONFIRM button once. To select another program, press CONFIRM again, then press
PRESET, then any of the 6 pre-programmed buttons, then press CONFIRM again.
5. If you are using the cylindrical basket, it will rotate whenever the appliance is in operation.
6. The carbon fibre heating element will switch ON and OFF during operation for
temperature regulation. This is completely normal.
7. Do not add any oil or water inside the bowl during cooking.
Cleaning
Caution
•
Always allow the appliance to cool completely before cleaning.
•
Never immerse the top and base into liquid.
•
Always unplug the power cord before cleaning.
•
It is important that the appliance be washed thoroughly after each use.
•
Do not use any abrasive materials for cleaning.
1. Disconnect the power cord and allow the application to cool completely before cleaning.
2. Wipe the lid and base clean using a damp cloth rinsed in warm soapy water.
3. Wash the bowl and other accessories in warm soapy water.
4. You can also clean the appliance with its automatic cleaning process. Add approximately
5cm of cold tap water into the bowl with a squirt of dishwashing liquid. Set the
temperature to 80°C and the time to 10 minutes, then press CONFIRM to start the
cleaning process to soften any stuck deposits. Accessories can be left in the bowl during
this process to soften any deposits.
5
Содержание KAMLTIAIRFRA
Страница 1: ......