Kogan KALED48XXXYA, Руководство пользователя

Страница: 17 / 28

DTV Manual tuning
You can select a DTV channel and find out how many programmes are being
transmitted on this channel. Press to select the channel, then press OK to
◀▶
search the programs.
Note: The Bad Normal Good bar graph on this screen shows the relative signal
intensity during DTV reception only. To obtain more detail regarding the signal
quality and strength of a received DTV station, refer to the Signal Information
option in this menu.
ATV Manual tuning
Australia no longer uses analogue television stations, so no results will show up
when this option is used when the TV is connected to an antenna. This menu is
handy, however, if you are using your TV to watch analogue signals from a VCR
or other older equipment that uses an RF modulator.
In Australia and New Zealand, select the “BG” sound system.
Program Edit
You can delete, move, skip or FAV most TV programs from the list of TV stations previously
located during the initial Auto Tuning process.
• Delete
Press the teletex red button on the Remote control and the
program in the cursor will be deleted from the list of stations. To
restore a deleted channel, perform a complete Auto Tune.
• Skip
Press to choose the program, press the blue teletext button
▲▼
on the Remote Control to skip this program from future up/down
manual channel selections. The strikethrough symbol will appear
to the right side of the program name. If you highlight the
skipped program and press the blue button again, you will cancel
the skip and the strikethrough symbol will disappear.
• Favourite
Press to choose the program, press the FAV button on the remote control and
▲▼
a heart symbol will appear on the right side of the program name and it will be
added to your Favourites List in your TV.
Choose the FAV program, press the FAV button again and you can cancel the
FAV setting and the heart symbol will disappear. Once your Favourite List is
created, you can press the FAV key on the remote control during TV reception to
quickly access your favourite channels.
Signal Information
Displays the signal information in DTV mode only.
Software Update (OAD)
This setting should be set to OFF.
Software Update (USB)
Warning: Do not attempt to use this option unless you have a valid software update for the TV
that has been supplied by Kogan.com stored on a compatible USB drive, and the drive is
connected to the TV. Remove the antenna cable from the TV's RF port, go to the channel menu,
select this option and then press OK to run the update.
16