Kogan KALED48XXXYA, Руководство пользователя

Страница: 15 / 28

Getting Started
Once you have connected your TV antenna and other AV playback equipment (eg. CD, DVD, Blu-
ray player) to the appropriate input sockets on the rear and side of the TV, you will need to be
comfortable with selecting several basic operations before setting up your TV using the Menu
system.
Firstly, the TV has two power modes – Standby and On. In standby mode, the TV is powered up,
but awaits a “Power On” command from either the Remote Control or from the Standby push-
button located on the lower right-hand side of the TV.
To switch the TV from off into Standby mode, activate the main On/Off rocker switch located at
the bottom mid-right side of the TV and wait for the Red power indicator on the bottom right of
the TV to light up. Then press the red power button on the remote control to fully activate the
TV (ie move from Standby to On mode). The power LED on the front of the TV will change from
Red to a blank colour when the TV is fully powered up, and after approximately 10 seconds the
screen will become active and can be commanded using the remote control.
First Powering on the TV
When you first power up your TV (or reset the TV to its factory settings), it will automatically
enter the TV auto tuning mode. This where the TV searches for available TV stations and stores
the station details it finds. Make sure the TV antenna is connected before proceeding with this
operation.
By default, the TV will offer a language selection (defaulting to English) so press the OK button
to confirm your selection. (Please note the instructions in this manual will follow the English
terms for menu settings). The OK button is located in the middle of the cursor arrow button area
of the remote control.
The TV will then offer a selection of countries, with Australia as the pre-set option. Again press
the OK button to confirm this selection. Your TV will now scan through all analogue (ATV) and
digital (DTV) stations. Australia does not have any current analogue stations running. This
process takes several minutes, and once completed the TV will skip to the first DTV program.
The “radio” channels found are sound-only services provided by some TV stations. The TV unit
itself does not receive DAB+Digital Radio broadcasts.
14