Koer C35-FC, Техническое руководство, Страница: 27 / 47

27
C35-FC
12.3.4. Parameters [4/4]
Humidity protection
12.3.3. Parameters [3/4]
Valve PID Tuning a PID controller for
the valve’s reaction involves
setting parameter values of
Proportional gain (
Kp), Integral
gain (
Ki) or Derivative gain
( Kd). If 2-term (PI) or 1-term
(P) control is needed, adjust
unnecessary values to zero.
Valves Stage 1 PID settings will
affect heating and cooling valve
reactions.
Valves Stage 2 PID
will affect valves in applications
with the second stage.
Select to save your changes.
By enabling the
Humidity
Protection function, any time
a relative humidity value
measured by the internal
sensor of the device exceeds
the
Max Relative Humidity
value, the C35-FC-H will
activate its fan and open the
cooling valve, until humidity
value is below
Max Relative
Humidity value again.
Humidity Protection is active
in
Economy, Standby mode,
whenever the device is in
cooling mode and if the
application type is a 4-pipe
system where there is no
demand for heating.
Select to save your changes.
The C35-FC can be calibrated
by adjusting the offset values
on the device. Adjust offset
values for each sensor using
the + / - buttons.
Select to save your
changes. Once the button
has been pressed, the values
will be updated to refl ect the
input of the offset value.
12.4. Offset