Koenic KBT-200, Руководство пользователя

Страница: 16 / 62

16
English
Operation
Trim/cut beard – with comb attachment
4
Slide the comb attachment on the blade and
sure it’s fit in correctly.
5
Set the desired cutting length by sliding
the comb attachment. You can choose the
lengths 0.5, 1.5, 2.5, 3.5, 4.5 and 5.5.
6
Switched on the beard trimmer. The LED
indicator flashes one time in red.
7
Guide the beard trimmer slowly over the
beard. Hold the trimmer in such a way that
the comb is as flat as possible.
Note
Depending on the position of the product and
the resulting angle, cutting lengths may differ.
Trim/cut beard – without comb attachment
8
Slide carefully the comb attachment upwards
with thumb and moderate force.
9
Without comb attachment the beard can be
cut to an even length of 0.3 mm. Switch on
the trimmer and hold the shaving head at the
desired height of the beard.
Insert/change rechargeable battery
1
Press down and hold the release button. Slide
off the battery compartment cover. Insert the
rechargeable battery.
To close the battery compartment, slide back
the cover while holding the release button
pressed. Ensure the cover is locked correct.
Charging the battery
2
Connect the charging adapter to the DC IN
socket on the charging stand and plug the
power adaptor in a suitable power outlet.
3
Put the product on the charging stand.
The LED indicator turns red and shows the
battery is being charged. The indicator turns
green, when the battery is fully charged.
Note
Ensure that the product is switched off before
charging. Make sure that the on/off switch is
switched down.
LED indicator
LED-Color Condition
No color During operation.
Red During charging.
Green Charging completed. Fully charged.
Red
During operation, when the battery
level is less than 20%.
IM_KBT200_150616_V05_HR.indb 16 16/6/15 5:39 PM