26
English
Remote control
Fig.
6
Remove the battery compartment cover.
Insert 2 batteries (type LR03/ AAA) while
paying attention to the correct polarity.
Close the battery compartment. Using
the control panel and the remote control
alternately might lead to a misalignment
of the product and the information
displayed on the remote control.
Note:
•
Press any button on the remote control
and the product adopts the current
setting from the remote control.
•
The signals of the remote control will
be transmitted with a short delay after
a button is pressed. This process is
indicated by the appearing symbol on
the remote control display.
•
Every press of a button on the remote
control will illuminate the display on the
remote control for a few seconds for
better visibility in the dark.
Control
panel
Remote
control Function
ON/OFF
Switch on or standby.
+
TEMP
Increase value, e.g.
temperature or timer
TEMP
Decrease value of
temperature or timer
MODE
MODE
Mode selection button
FAN
FAN
Fan speed selection
button
SLEEP
SLEEP
Sleep mode on/off
SWING
SWING
Fan outlet oscillation
on/off
—
LED
Display and indicator
lights on/off
TIMER
on
off
+
–
TIME
OFF
Adjust switch standby
time
TIME
ON
Adjust switch on time
—
SHORT
CUT
Choose preset mode
and temperature
Operation
Fig.
5
Switching on/off
The product can only be switched into
Standby. Unplug in order to disconnect
from the mains.
Press the on/off button or the
ON/
OFF
button to switch the product on or
standby.
Note:
•
After a power break or when the product
is switched into standby and on again in
a short time, the refrigerating compressor
will resume work after 3 minutes (delayed
start). This is to prevent the cooling circuit
from damages.
•
If the product is tilted over, switch it
standby and unplug immediately. Wait
at least 2 hours before operating the
product again to avoid damages on the
refrigerating circuit.
•
Always switch the product into standby
before unplugging.
IM_KAC3231_161201_V06_HR.indb 26
1/12/16 4:21 PM