K90100/K90190 Auto Melting Point Unit
Operation and Technical Manual
Page 20
Koehler Instrument Company, Inc.
1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA
Toll Free: 1-800-878-
9070 (US only) • Tel: +1 631 589 3800 • Fax: +1 631 589 3815
http://www.koehlerinstrument.com • e-mail: [email protected]
Petroleum Testing & Analysis Instrumentation • Custom Design & Manufacturing
Press ‘SET RATE’ key repeatedly until the desired rate
is displayed & Press ‘ENTER’.
For e.g. To select 1°C/Min, p
ress ‘ SET RATE’ key thrice.
Now press ‘ENTER'. Instrument gives Beep and
returns to Program Screen
Now You can Add another Sample Analysis
Program.
B) To modify an existing program:
If program parameters are already stored at a particular program number then to
modify the desired parameter/s, follow the same procedure as for creating a new program.
The previously stored parameters are displayed, which may be acknowledged by pressing
‘ENTER’ or may be modified as required.
II) To View Program Parameters:
Select ‘VIEW’ from menu by pressing ‘2’ & ‘ENTER’
Display reads,
Enter the program no. whose parameters are to be viewed.
The program parameters v.i.z. Sample Name, Mode, Operation, Set Temp, Furnace
Temperature Cutoff Limit, Heating Rate are displayed one after another and
Display screen returns to Program Entry Menu screen with a beep.
Rate: 0.2°C/MIN
`ENTER’ to select…
Rate: 1.0°C/MIN
‘ENTER’ to select…
Prog No(1
– 20):_
VIEW Mode
B
B
