Kodiak SXA1900HX, Руководство пользователя, Страница: 5 / 17

4
Operation
Starting the engine :
1. Read Honda Engine Owner’s Manual.
2. Open fuel cock.
3. Set choke lever towards the “
close ” position when engine is cold.
If engine is warm, choke lever should be moved to the " Open ” position.
4. Set the engine switch to the “ run ” position.
5. Pull on starter rope with a fast steady pull to start the engine. (Diagram 2)
6. After engine has started, move the choke
lever back gradually to the “
Open ” position.
7. Once the engine is running at normal
speed, useable AC power is available.
Diagram 2: Starting the engine.
Applying AC load (single voltage type) (Refer to Diagrams 3, 4, 5.) :
1. Place generator’s “ no fuse breaker ” switch in the “ 0 " position.
2. Start engine (Please refer to the Honda Engine Owner’s Manual.)
3. Allow the engine to warm up for 2 - 3 minutes before connecting tools
or appliances.
4. Insert the plug of the electrical appliance into the “ AC receptacle ”.
5. Place generator’s “ no fuse breaker switch ” in the “ 1 ” position.
6. Reset the GFCI receptacle.
Diagram 3: SXA1900HX AC Panel
Tee Slot GFCI Receptacle
“Power On” Indicator Light
No Fuse Breaker
Ground Terminal